Mon–Sun 8am–7pmLacey · Olympia · Tumwater · Yelm · DuPont

NisquallyAppliance Service

Bosch · dishwashers · 100, 300, 500, 800 and Benchmark series

Bosch Dishwasher Repair in Lacey & Olympia, WA

The quietest machine in a Bigelow Highlands kitchen has stopped with E24 and water standing an inch deep in the base. Or E15, and it will not start at all.

ONE FEE
buys the meter visit · then sits inside the repair total
INDEPENDENT
E15 leaks found, not tipped
TODAY
a machine that quit this morning often gets a slot today
Illustration of a dishwasher with the door down and the filter lifted out
Bosch dishwasher · Lacey

Book a visit

Dispatch calls back with a two-hour arrival window and names the visit fee on that call; say yes to the fix and the fee becomes one piece of the number you approved.

Your details reach dispatch and stop there, and they are used only for this repair.

Bosch dishwasher

Bosch dishwashers from South Capitol to Black Lake

Bosch dishwashers arrived in Olympia with kitchen remodels of the past two decades. The 300 and 500 series are in the Craftsman houses of South Capitol and the Bigelow Highlands, the 800 and Benchmark in view houses off Cooper Point Rd, the 100 series in Hawks Prairie kitchens and the condos near Percival Landing. Underneath they are alike: a stainless tub, a circulation pump with a built-in heater called the heat pump, a separate drain pump, a three-part filter in the sump, a flow sensor on the fill, and a float in the bottom pan that shuts everything down when water collects there. The machine assumes a clean filter, and when it is not, drain and wash both suffer.

The water here does the wearing. Olympia and Lacey groundwater coats a Bosch heat pump and hazes the glasses; a well off Black Lake or on the Steamboat peninsula does it faster and adds iron. A softener out of salt in a West Olympia house shows on the wine glasses before anyone checks the bin. The E15 float is the local signature: an old sump seal in a South Capitol basement kitchen weeps a little every cycle until the pan fills, and the machine stops until someone finds the leak instead of tipping it back. And a Bosch on a septic system at a lake cabin should not be a garbage disposal, which the filter will tell us.

What goes wrong on a Bosch dishwasher

Sign at the machineCause underneathRepair
Will not start, E15, hum from belowWater in the bottom pan has lifted the float; a seal, hose or pump is leakingPull the side panel, find the leak, replace the seal or hose, dry the pan, reset the float
Water left in the tub, E24Drain pump blocked or failed, drain hose kinked, or the sink loop wrongClear the pump, replace it if weak, correct the hose and the high loop
Dishes wet and cool at the endHeat pump heater open, or the temperature sensor goneTest the heater circuit, replace the heat pump, confirm the water reaches temperature
Cloudy film on everythingHard water, softener out of salt, or no rinse aidConfirm the machine is doing its part, then explain what the water is doing to the glass
Leak at the front bottom cornerDoor seal worn, or the lower door gasket strip missingReplace the seal or the strip, adjust the door, run a cycle while we watch
Stops mid-cycle, no codeDoor latch switch, or a tired control moduleTest the latch, check the module connections, replace what fails

Bosch dishwasher codes, translated

DisplayMeaningResponse on our end
E15Water has reached the bottom pan and the float has shut the machine offLocate the leak with the panel off, fix it, dry and reset; we do not just tip the machine
E22The filter is blocked or water is standing in the sumpClean the filter set and the sump, check the drain pump impeller, show you the filter
E24The tub is not draining in the time allowedTest the drain pump, clear the hose and check the high loop or air gap, replace the pump when needed
E25Something has lodged in the drain pump, or its cover has slipped offRemove the debris, refit or replace the pump cover, test the pump under load
E09The heating circuit in the heat pump has failedTest the heater resistance, replace the heat pump, confirm a hot wash
E17Too much water is coming in, or the flow sensor cannot see the fillMeter the fill valve and the flow sensor; swap whichever failed, then check the fill level

Bosch dishwasher repair, starting at the sump

The Bosch diagnosis begins by reading the code and pulling the lower rack so the technician can lift the filter and see the sump, because the sump explains most of what a Bosch does. Then the side panel comes off, the bottom pan is checked for water and the float is tested. The drain pump gets a meter, the heat pump gets a resistance reading, and the flow sensor and the inlet valve get tested when the fill is in question. The van carries Bosch drain pumps, heat pumps, sump seals, door seals, inlet valves, filter sets and the flow sensor. Control modules are model-specific and usually ordered, and the return visit is at no additional charge.

We are independent, based in Lacey, with no relationship to Bosch. If your dishwasher is young enough that Bosch’s own coverage should pay for the repair, we say so first, before you spend anything with us. Owners of South Capitol rentals and downtown condos approve the written figure by phone or email, receive the photo, invoice and warranty terms in email, and the tenant only has to be home. Diagnosis carries a fee that dispatch quotes when you book; go ahead with the repair and its charge starts from the fee already paid. If you turn the work down, your bill closes at that fee. Nothing gets a Bosch repair price until the diagnosis is finished, and then it arrives as one written figure.

A Bosch dishwasher diagnosis means the panel off and a meter on the pumps, for a fee dispatch quotes at booking. Approve the written repair and its charge starts from that fee; the warranty term goes on the invoice. Request Bosch service →

Bosch dishwasher questions

My Bosch dishwasher in Olympia shows E15. Can I just tip it back?

You can, and it will drain the pan and run again for a while, but the leak that filled the pan is still there. E15 is the float doing its job. We take the panel off, find the seal or hose that is weeping, replace it, and dry the pan so the machine stops for a real reason next time.

Why will my Bosch dishwasher in Lacey not drain?

E24 or a tub of water usually means the filter and the drain pump. The three-part filter packs with food, the impeller catches a seed or a bit of glass, or the pump has weakened. Sometimes the drain hose under the sink has no high loop. We check all of it and replace the pump when it needs replacing.

Can you fix a Bosch dishwasher on well water in West Olympia?

Yes. Wells off Black Lake and on the peninsulas coat the heat pump and haze the glasses. We replace the heater when it fails, and when the dishwasher checks out and the trouble is the water, we tell you, so you can look at the softener instead.

Is a Bosch dishwasher worth repairing after ten years?

Often. The tub and the racks last, and a drain pump or a heat pump is a bounded repair. The number goes on paper after the diagnosis and the decision is yours. When a control module is the fault, we tell you directly and leave the weighing to you.

What does a Bosch dishwasher diagnosis cost?

One set fee, the same in Olympia, Lacey and the rest of the ring, and dispatch names it when you call. That pays for the code reading, the sump inspection and the meter work, and it ends with one written repair number. If you proceed, the repair charge starts from the fee already paid. If you do not, the fee is where it stops.

More Bosch pages

Other brands

The machines we fix

1 of 8

Illustration of a front-load washer draining through its pump filter into a bucket
No. 1Front-load washer pulled from the wall for a drain pump test
Illustration of a refrigerator with both doors open and a probe thermometer on the shelf
No. 2Refrigerator with both doors open while its cooling is tested
Illustration of a dryer with the top lifted, the drum belt and the vent duct
No. 3Dryer opened with the drum out to reach rollers, belt and heater
Illustration of a gas range with the cooktop raised and the igniter sparking
No. 4Gas range with the cooktop raised for an igniter check
Illustration of an ice maker lifted out of the freezer above a bin of cubes
No. 5Ice maker lifted out of the freezer for a fill valve test
Illustration of a French-door refrigerator with the freezer drawer pulled out
No. 6Freezer drawer pulled to inspect the defrost system
Illustration of a stacked washer and dryer in a hall closet
No. 7Stacked laundry pair tucked into a hall closet
Illustration of an upright garage freezer standing open beside a pegboard
No. 8Upright garage freezer open for an evaporator check

How a visit runs

From the first phone call to the last test cycle

  1. You reach out

    Dispatch picks a two-hour slot with you, most often today or tomorrow, and calls again once the van rolls away from the shop on Marvin Rd.

  2. Measure first

    An amp clamp, thermometer or ohmmeter goes on the machine before anyone says what is wrong. Then the dead part gets named in words anyone can follow.

  3. The number, written

    Repair cost goes on the ticket as one total with the visit fee already baked in. Say yes or say no; nobody bills by the hour while you think.

  4. Repair on the spot

    Pumps, valves, heaters, igniters, rollers and boards for the usual models travel in the bins behind the driver, which closes most jobs on that first stop. A part on order means a second trip at no added charge.

  5. Test and paperwork

    You watch a full cycle run, the floor and panels are left as we found them, and an emailed invoice carries the written warranty term.

Bosch dishwasher trouble: one call, one written price.

One call sets a two-hour window. The technician arrives with a meter, the fix is priced on the ticket with the visit fee already tucked into it, and the invoice spells out the warranty. Yelm and Ruddell Rd get identical terms.